PNI SafeHome DIM101 Manual De Usuario página 7

or flickers, please connect the capacitor in the
package between the Neutral wire and Line wire
according to the diagram below (in parallel with
the light source):
N L
» The switch is installed and connected
correctly, but the touch button does not work.
First make sure that the wires are connected
correctly and that the bulb is not burned out.
1. Cut off the power for 1 minute.
2. Restart the power supply.
3. Wait 10 seconds and then touch the buttons
to operate the switch.
Compatible lamps or bulbs
PNI SafeHome DIM101 and PNI SafeHome
DIM202 switches are only compatible with
lighting sources that support the Dimming
function (light intensity adjustment).
User manual - 7