steelplay SCART Manual Del Usuario página 3

Thank you for your purchase of a Steelplay® SCART to HDMI Converter
WARNING - FOR YOUR SAFETY WHEN USING THIS PRODUCT, WE RECOMMEND THAT YOU READ
THIS MANUAL, DOCUMENTATION OF THE GAME CONSOLE, THE DOCUMENTATION OF THE
MONITOR AND RETAIN THESE DOCUMENTS FOR FUTURE REFERENCE CAREFULLY. PLEASE KEEP OUT
OF REACH OF YOUNG CHILDREN. CHILDREN MAY BE INJURED BY SWALLOWING SMALL PARTS. THIS
PRODUCT IS NOT RECOMMENDED FOR CHILDREN UNDER 3 YEARS.
SAFETY INSTRUCTIONS
1. Safety of children and vulnerable people
Make sure to never leave this product within the reach of young children. Do not let children play with the device. Do not leave packaging within the reach of children.
Children should not clean or attempt any maintenance on the device unattended.
2. General Security
Do not use the product with wet hands and avoid any kind of moisture. Do not move the product when it is powered. Do not drop, do not disassemble, do not open,
do not crash, do not bend, do not deform the product or any of its parts, this could seriously damage them. Do not use water to clean the product or any other cleaning
agent. Do not use abrasive cleaners, scouring pads, solvents or metal objects. To clean the product, use an anti-static cloth. To avoid electric shock, do not disassemble
the product yourself. All repairs must be performed by qualified personnel. Prevent any liquid from entering the product. Do not throw this fire. Refer to local guidelines
on appropriate methods to get rid of electronic waste. Do not insert any object other than those permitted in the product as they may touch dangerous voltage points
or cause a short circuit resulting in a fire or electric shock. Do not place heavy objects on the product. Avoid excessive shock or vibration of the unit. This unit is intended
for indoor use only. The unit must not be exposed to water dripping or splashing. Do not place objects filled with liquids such as vases on the device. Do not change the
specifications of this device. If the power cable is damaged, it must be replaced by the manufacturer, its service agent or a qualified technician to avoid a hazard. Before
any maintenance, switch off and unplug the AC power supply. Do not spray water or steam to clean the unit. Be careful not to hurt your hands or fingers on the sharp
corners. Check that the mains voltage corresponds to the voltage indicated on the label on the back of the product or in the user manual. The lack of light does not
mean that the product is completely disconnected from the power supply. To disconnect the device, remove the cable. The humidity of the room where the product is
installed must not exceed 90%. The transfer of the product from a cold to a warm place may cause condensation on some components. Let the condensation evaporate
before turning on the device.
3. Installation
Do not install and do not connect a damaged device. Carefully follow the installation instructions provided with the device. Do not install or do not use it in a place where
the temperature is below 15 ° C or in a place exposed to the elements. Do not place the product in direct sunlight or near a source of heat. Install the product in a dry
place and protected from dust. Do not place in areas subject to splashing water. Do not place the device flame sources such as lighted candles. Before installing the
device, make sure the surface will bear his weight.
Do not place this product on an unstable surface. Do not install the product on shelves or on a sloping surface.
Also avoid locations subject to vibration or not to support the product properly. Otherwise, the product may fall, which can lead to injury or damage the product.
4. Electrical connection
The unit must be grounded. Always use a properly installed shockproof socket. Check that the electrical data on the rating plate match those of your network. If this is
not the case, contact an electrician. Do not use multiple adapters or extension cords. Do not damage the power plug or power cable. The replacement of the machine's
power cord must be done by our after-sales service. Connect the power plug to the outlet at the end of the installation. Make sure the socket is accessible once the unit
is installed.
5. Use WARNING ! Risk of injury, electric shock, fire, burns or damage to the device
This device is designed for domestic indoor use and should not be used otherwise. Follow the safety instructions in the manual.
6. Disposal WARNING ! Risk of injury or suffocation
Unplug the unit from the power supply. Disconnect the power cable and turn off the device before its disposal. Do not throw this to fire. Refer to local guidelines on
appropriate methods to get rid of electronic waste. Observe the safety rules when disposing of waste electrical and electronic equipment (WEEE).
7. Cables
Place all cables and cords so that nobody (or pet) can be caught in the feet or shot by mistake by moving in the room. Keep cables and cords out of reach of children
and pets. Do not let children play with cables and cords. If you do not plan to use this product for a long time, turn it off by disconnecting the power plug. During
thunderstorms, we recommend disconnecting the product so that it is not damaged by possible electrical or electromagnetic surges. For this reason, the outlet should
be easily accessible, so as to disconnect when needed. Unplug the device immediately if you notice it exudes a burnt or smoke. Do not under any circumstances open
the product yourself, you might receive an electric shock. Do not touch the power plug with wet hands. Also, if the plug is wet or covered with dust, dry or completely
wipe the power cord. Excessive moisture can cause electric shock. Be sure to connect the power cable to a grounded outlet. (Does not apply to devices that do not
require grounding.) If it does not, you may be electrocuted or injured. Attach the power cord. If the power cable is not attached properly, a fire may occur. Make sure
the power cord is not in contact with hot objects like a heater. Failure to do so may cause fire or electric shock. Do not place heavy objects or the product itself, on the
power cord. Do not plug too many devices on one wall strip. Do not insert a conductor wire as a metal rod in one end of the power cable if the other end is connected
to the wall input terminal. Also, do not touch the power cord right after the connection.