Publicidad
Idiomas disponibles
Idiomas disponibles
USER INTERFACE
Indicator LEDs:
Status LEDs (RDNet network):
Controls
INPUTS AND OUTPUTS
Power supply inputs and links:
Audio inputs:
Audio outputs:
RDNet inputs/outputs:
USB (firmware update):
POWER SUPPLY SPECIFICATIONS (CONSUMPTION)
Consumption at 1/8 of the power under
normal operating conditions (*):
Consumption at 1/3 of the power under
maximum operating conditions (**):
Consumption with speaker on and
no signal (idle):
Inrush current:
Maximum number of modules per
power supply line (**)
[mains input + mains link]:
* NOTE FOR THE INSTALLER: Values refer to 1/8 of the power under normal operating conditions (musical program with rare or no clipping).
For any configuration type, we recommend considering them to be the minimum values for dimensioning.
** NOTE FOR THE INSTALLER: Values refer to 1/3 of the power under heavy operating conditions (musical program with frequent clipping and
limiting). We recommend dimensioning in accordance with these values for professional installations and tours.
VIO S218F
48
Limiter, Signal, Mute/prot, Ready
Link, Active, Remote Preset Active
Polarity (0°/180°), Delay (0–9.9 ms), Cardioid Function,
Xover Frequency, Sub Attenuation, System Test
PowerCON® TRUE1 In/Link
1x balanced XLR IN (isolation: Floating ADC )
1x balanced XLR link OUT
1x balanced XLR HPF Xover audio
Data In / Data Out (etherCON® connectors)
1x type B USB
3.2 A (220-240V~) - 5 A (100-120V~)
6.6 A (220-240V~) - 12.3 A (100-120V~)
53W
3.7 A
1+0 (220-240V~) / 1+1 (100-120V~)
English
Cod. 420120416 REV. 1.0
Publicidad
