Zethors S8 Manual Del Usuario página 10

ation within 60s, the screen
will automatically turn off.
2. When pressing the Mode
Button to select different
inflation objects, the screen
will display the preset tire
pressure of the correspond-
ing inflation object.
3. Battery Power Display: The power icon flashes red light
when the remaining power of the air pump is 5%, while it
shows solid red light when the remaining power is 20%;
while charging, it flashes blue light; after fully charged, it
shows solid blue light.
Accessories Using Instructions
This air pump comes with an inflation nozzle, an inflating
needle, and a Pesta Valve. You can use the correspond-
ing nozzle according to different usage scenarios.
1. Take out the required inflation nozzle/inflating needle/
Pesta Valve, align it with the inflation nozzle of the air
pump and tighten it to combine them together.
2. Use the same operation steps as "Air Pump Using In-
structions" to inflate related items.
Charge the Air Pump
1. Under power-on/off state, insert the charging cable into
the air pump USB-C charging port to charge.
2. While charging, the power icon displayed on the screen
flashes red light; after fully charged, it shows solid blue
light.
07