IKEA RODRET Manual De Instrucciones página 5

Get to know your product
Pairing button
Press to turn on, or long-press to increase brightness
Press to turn off, or long-press to decrease brightness
Changing the battery
A red LED light will blink when you press any button the dimmer/switch to
show that a new battery is needed. Open the battery lid and replace with
a new AAA/HR03 battery. We recommend using a LADDA rechargeable
battery. Please note it is sold separately.
Factory reset
To reset and remove all connected products, quick-press the pairing button 4
times (within 5 seconds). Follow steps 1-3 to reconnect your smart products.
Care instructions
To clean the product, wipe it with a soft cloth moistened with a little mild
detergent. Use another soft, dry cloth to wipe dry. Never use abrasive
cleaners or chemical solvents as this can damage the product.
IMPORTANT!
• The wireless dimmer is for indoor use only and can be used in
temperatures ranging from 0º C to 40 ºC.
• Do not leave the wireless dimmer in direct sunlight or near any heat
source, as it may overheat.
• Different building materials and placement of the units can affect the
wireless connectivity range.
5