OOGarden PH050012 Instrucciones De Uso página 29

HEATER Key - On-off key for the heating system. Press this key the heating system will start
working and the red light will be turn on. Press again and the heating system will stop working and the light will be turn off.
When you press this key, "heather", the heating system is operating in the automatic mode, and the red light is turned on. At
the same time, the signal of the filter and the filter pump is turned on starts to operate. This is normal as the system
designed.When the preset temperature has been reached, the heating system will stop working, but the heating indicator light
will not turn off. The filter pump will continues to operate, the red light is on also. When the water temperature falls to 2
below the preset temperature, the heating system will start working automatically.
TEMPERATURE Key – Key for setting temperature. Press this key and the numbers on the
display screen will start flashing, and the keys for increasing or decreasing temperatures can be pressed to set
the temperature. When settings are finished, press the TEMPERATURE Key again to confirm
is 40°C, and temperature can be set in the range of 20-42°C.
------ Key for increasing temperature
------ Key for decreasing temperature
Default temperature
.