Twin-Star International ClassicFlame 42MMS6342 Instrucciones De Montaje página 36

OPERATION INSTRUCTIONS
Learning Function
The learning function allows your Sound System to be controlled by your TV remote control (Note:
Remote must send infrared signals). Any unused button on your TV remote control can be used to
control the Sound System. For example, when you connect your TV to the Sound System using the
RCA Stereo cables or Digital Fiber Optic Cable the TV volume and mute will no longer be controlled
by the remote that came with it. Some TV remotes also come with extra buttons. These buttons can
also be used for any of the learning options below.
Some of the programmable functions need to be selected from the remote contol as noted below.
Note: It is able to learn most IR protocols, not all remote can be programmed.
To start the learning function:
• At power on mode, press
• Select the function to learn on the control panel or remote.
o The function (below) will flash. Point your TV remote at the flashing LED on the sound
System and hold down the button you want it learn from.
o When learning is complete the function goes solid for 3 seconds (stops flashing) and
SEL will now start flashing.
o You can now select the next function to learn or end the process by pressing the
for 5 seconds.
V Volume up [control panel or remote control]
V- Volume down [control panel or remote control]
SI Mute [remote control]
ON Power [control panel or remote control]
SO Source [control panel]
AU Aux [remote control]
OP Optical [remote control]
Bluetooth [remote control]
BL
BA Track Back [control panel or remote control]
FO Track Forward [control panel or remote control]
PL Play [control panel or remote control]
T Treble up [remote control]
T- Treble down [remote control]
B Bass up [remote control]
Bass down [remote control]
B-
42MMS6342REV.0
All manuals and user guides at all-guides.com
5 seconds to learn mode. SEL starts flashing.
www.tsicustomerservice.com
36
MP#YC