Glacier bay HDQFP4AF263CP Instrucciones De Montaje página 4

Installation
1
Installing the faucet assembly
CAUTION: Always turn off the water supply before
removing an existing faucet or replacing any part of a
faucet. Open the faucet handle to relieve water pressure
and ensure that the water is completely shut off.
□
Shut off the water supply. Remove the old faucet.
□
Clean off the mounting surface.
□
WITHOUT DECK PLATE: Insert the outlet hose (I),
water supply lines (J) and pull-down spray hose
(K) through the mounting hole in the sink until the
faucet assembly (A) sets on top of the sink (not
included).
A
I
J
K
4
□
WITH DECK PLATE: Place a bead of clear silicone
sealant (not included) around the base of the
putty plate (D). Align the hole in the putty plate
(D) and deck plate (C) with the mounting hole in
the sink (not included). Insert the outlet hose (I),
water supply lines (J) and pull-down spray hose
(K) through the deck plate (C) and mounting hole
in the sink until the faucet assembly (A) sets on
top of the deck plate (C).
A
I
J
K
2
C
D
1