Publicidad
Idiomas disponibles
Idiomas disponibles
1. On/Off and Speed Settings
• To turn the air cleaner on, press the ON/OFF
When the air cleaner is on, the ON/OFF button on the control panel will be lit and
the air cleaner will start to operate on LOW speed.
• Once the air cleaner is ON, press the SPEED+ button to increase the fan speed
to the MED setting. Press again to increase the fan speed to HIGH setting. To
decrease the fan speed, press the SPEED– button until your desired setting is
reached. The fan speed setting is indicated by the illuminated ring around the fan
symbol.
• To turn the air cleaner OFF, simply press the ON/OFF
2. Timer
There are four possible timer settings: 2 (two) hours, 4 (four) hours, 8 (eight)
hours, and 12 (twelve) hours. To activate the timer press the TIMER+ button
on the control panel. Each time the + button is pressed, it will display the
successive settings. To return to a setting already passed, press the TIMER–
button. Once a timer setting has been selected, it will remain displayed on the
TIMER screen. To operate continuously, cycle down through all timer settings
until no timer setting is displayed.
3. Oscillation
To activate the oscillation feature, press the
the button a second time. Unit will not automatically realign with foot when
oscillation is stopped. To achieve alignment, stop oscillation at the moment the
body becomes aligned with the foot.
button on the control panel.
button on the control panel.
button. To stop oscillation, press
8
4. Germicidal UV-C Bulb
The UV-C technology in this air cleaner kills germs, bacteria and viruses. To activate
the UV-C bulb, press the UV-C button on the control panel. To turn the UV-C bulb off,
press the button again.
5. Clean Filter Indicator
The air cleaner is equipped with a CLEAN FILTER indicator to let you know when it
is time to clean the True HEPA filters, about every 480 hours of use. When the True
HEPA filters are ready to be cleaned, the CLEAN FILTER indicator will light up on the
control panel.
If the air cleaner is used daily, we recommend cleaning the True HEPA filters more
frequently.
Once the True HEPA filters have been cleaned, press and hold the CLEAN FILTER
button until it beeps to reset the Indicator.
9
Publicidad
