Publicidad
All manuals and user guides at all-guides.com
LU-297 / 298
Press the lid opening switch to unlock the lid‟s top cover and open it.
.
Pour water into the airpot up to the "MAX" water mark
Close the top cover and lock it. Closing the top cover creates a clicking sound.
Plug it in to the power source. The red indicator lights up to indicate the heating process.
When water has boiled, the red indicator turns off and the green indicator lights on signaling the keep warm state (temperature approximately 98°C).
When dispensing hot water, press the pressure pad with enough force to bring out water from the airpot.
CLEANING AND MAINTENANCE
When cleaning the airpot, make sure to unplug from the power source and the hot water has cooled down completely before taking it out from the airpot. It is advisable to clean the airpot inside and outside
before using for the first time.
Cleaning the airpot scheduled once a month or as desired to ensure water quality and to lengthen service life of inner pot.
When the airpot is not going to be used for a long time, it should be cleaned and dried before sealing in a plastic bag and stored in a safe, dry place.
8
Publicidad
