Uline H-2618 Instrucciones

H-2618
BOOTIE BUTLER™ –
SMALL
PROPERLY LOADING DISPENSER
1. Remove plastic bag. (See Figure 1)
Figure 1
2. Prop dispenser up to load. (See Figure 2)
Figure 2
3. Align the blue clips with the slots of the track with the
arrow pointing downward. Make sure all clips enter
the slots with the round tip on the outside of the
track. (See Figures 3-4)
Figure 3
PAGE 1 OF 6
1-800-295-5510
uline.com
INSTRUCTIONS
4. Push down and forward (keeping the cartridge at
5. Once the cartridge is 3-4 inches below top of tracks,
Pour le français, consulter les pages 5-6.
a 90˚ angle), ensuring all blue clips enter the track.
Use both hands if necessary. (See Figure 4)
Figure 4
remove the yellow ribbon and cardboard.
(See Figures 5-6)
Figure 5
Figure 6
Para Español, vea páginas 3-4.
0421 IH-2618