4.- OPERATION
REMOTE CONTROLLER OPERATION
Infrared IFH-2001 is operated using the remote control supplied with the heater. Insert 2 x AAA Alkaline
batteries into the remote control.
3
Inserting Batteries
Insert 2 AAA/ Alkaline type batteries into your remote control
1. Flip the backside of your remote control and pull out battery cover. Insert the batteries in accordance with
the instructions and polarity of the batteries.
2. Change the batteries in the same way described above.
Warning:
1. Replace the old batteries with the same type batteries. Otherwise, your heater may not function well.
2. Pull out the batteries in case of long terms of disuse to prevent leakage which may impair your remote
control.
3. Do not allow water or liquid to get into the remote control.
Receptor and indicator
Turn On / Off the heater.
1.
1
Increase the heating level (L1 → L2).
2.
2
Decrease the heating level (L2 →L1).
3.
The light indicator will display the current status of the heater:
-
-
-
-
Switch
Red. Standby.
Green. Heating Level 1. (1000 W)
Blue. Heating Level 2. (2000 W)
Blue and Green blinking. Over heat protection.
13