System Build 2484056COM Instrucciones De Montaje página 13

STEP 7
Assure that your unit is square.
Distance from corner to corner
must be equal as shown.
systembuild.com
IMPORTANT! THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT
12
AND MUST BE INSTALLED PROPERLY.
(x34)
Attached the back panel as shown nailing straight into the raw edges.
#A21110
Assure that the unit is square.
Distance from corner to corner must be equal as shown.
J
"raw surface shown"
Flush the bottom edge of the back panel
with the bottom edge of the bottom (D).
13
12
You
Tube