25. Ask for assistance to stand the unit upright.
26. Insert the assembled drawers into the frame. Extend the Ball Bearing Slide Tracks on the Side Panels (B
and C) all the way forward (including ball bearing cart). Then align the Slide Runners on the assembled
drawer with the Slide Tracks and push the drawer carefully inside until it stops.
NOTE: If the drawer does not go in smoothly, please take it out and repeat the step. If you need to
remove the drawer, please pull the drawer all the way out, then simultaneously push the plastic release
lever of the ball bearing slides up on one side and down on the other side, and then pull it completely
out.
27. Insert the Cam Lock Covers (15) to conceal the cam locks underneath the Upper Fixed Shelf (E).
Assembly Instructions
B
M
E
C
N
x 4
20
15
N