Publicidad
Enlaces rápidos
Publicidad
Resumen de contenidos para G4M PRO STAGE
- Página 1 PRO STAGE Setup Guide...
- Página 3 Warnings WARNING! • Inspektera varje komponent noggrannt för att kolla efter skador och slitage osv. innan du börjar. ADVARSEL! • Inspektera den ihopmonterade scenen noggrannt innan varje användning, för att försäkra dig om att alla • Læs og tjek, at du forstår brugsanvisningen før du begynder monteringen. •...
- Página 5 Contents Checklist PRO STAGE PLATFORM 2MX1M OR 1MX1M STAGE HANDRAIL 2M OR 1M STAGE STEPS 40CM OR 60CM STAGE LEGS 60CM OR 40CM, 4 PACK STAGE HANDRAIL HOLDER STAGE PLATFORM LEVELER...
- Página 6 Contents Checklist STAGE HANDRAIL CLAMP STAGE PLATFORM CLAMP STAGE PLEATED CURTAIN 250X60 OR 104X60 OR 205X40 OR 105X40 Tools Required ALLEN KEY, SIZE 3 - STAGE PLATFORM LEVELER ALLEN KEY, SIZE 6 - STAGE STEPS ALLEN KEY, SIZE 8 - STAGE HANDRAIL HOLDER...
- Página 7 STEP 1 STEP 2 Insert the four legs into each corner of the Pro Stage Platform and turn each bolt clockwise to secure. Repeat Two persons are required to turn the staging upright. Never manoeuvre stage platforms alone. for all Pro Stage Platforms ensuring that all legs are securely attached.
- Página 8 Use 2 x Stage Platform Clamps to attach the two Pro Stage Platforms. Turn the bolt on each Stage Platform edge you wish to connect. Tighten it with a size 3 allen key. This will ensure that your Pro Stage Platforms Clamp clockwise to ensure the Pro Stage Platforms are securely joined.
- Página 9 STEP 1 STEP 2 To attach Stage Handrails to your Pro Stage Platforms, first slide a Stage Handrail Holder mounting point into Slide the Stage Handrail down in to the Stage Handrail Holders. Once in place tighten the bolts on the the mounting rail of your Pro Stage Platform.
- Página 10 STEP 3 Use a Stage Handrail Clamp to join and secure two Stage handrails. Loosen the Handrail Clamp and place it against the two handrails. Rotate the rear of the Handrail Clamp so that it sits behind the two Handrails. Tighten the bolt on the Handrail Clamp in a clockwise direction.
- Página 11 Attaching Steps STEP 1 STEP 2 To attach either 20 or 40cm Stage Steps to your platform, loosen the metal arms on the steps at their base so Turn the arms until they line up with the platform rail and slide your connection blocks in to the rail, so that they can be turned freely and remove the bolts from the end of the arms to release the connection blocks and they are aligned with the arms.
- Página 12 Attaching Skirts STEP 1 STEP 2 To attach skirts to your platform take a pack of skirt mounts and affix them to the edge of the platform above Use the velcro on the skirts to fix the skirt to the skirt mount. the rail, evenly spaced and using five per metre.
- Página 13 250x250mm width and depth. Only use one block per group of legs to preserve structural integrity. Do not build the Pro Stage system on an inclined surface as this can impact stability and integrity. Only build on an appropriately flat and solid surface.
- Página 16 If you have any more questions about this product, please do not hesitate to contact the Gear4music Customer Service Team on: +44 (0) 330 365 4444 or info@gear4music.com KETTLESTRING LANE | YORK | YO30 4XF | UNITED KINGDOM • LAHNSTRAßE 27 | 45478 MÜLHEIM AN DER RUHR | DEUTSCHLAND • WWW.GEAR4MUSIC.COM...