Intenso TAB 744 Manual De Instrucciones página 32

Confirm the entered password, if necessary, by touching the enter key and then select Connect.
After a short while you are connected.
Notes
a) If the device goes into standby mode, WiFi is turned off automatically. This reduces power consumption and thus automatically
leads to a longer battery life. When the device returns to active mode, the WiFi will automatically re-connect. This may take a few
seconds.
b) The list of currently searchable WiFi networks will be updated automatically.
c) If the WiFi function is enabled, the device automatically connects to an already configured network, provided it is within range.
d) If an unknown wireless network is in range, an information box will appear.
Manual connection
In order to search for an accessible WiFi network manually, please proceed as follows:
(1) Open the settings.
(2) Now open the WLAN settings and tap the three points in the upper right corner and then select
"scanning".
(3) Should the WiFi network not appear in the list of available networks then select the item `Add
network´ in order to enter the network SSID, the security protocol and the possibly related password.
Tap `Save´ to confirm your entries.
EN - 7