weBoost Home Room Manual De Usuario página 10

______
Step 7: Compare Results
Using the field test mode described in step 3, measure the new signal
strength and write it down here ___________.
Compare this number with the original reading you took in the same part of the house.
If the number is higher (closer to zero) than the original reading without booster, your
booster is working. If it is not, look at the lights on the booster and the section at the
end of this manual "Test System: Lights".
Did you know a signal increase in just
3dB is 2 times the power and signal amplification!
Signal Strength
EXCELLENT
CELL
TOWER
3G/1x -70dBm
4G/LTE -90dBm
DECIBEL GAIN
3dB
6dB
10dB
12dB
20dB
8
Signal Strength Signal Strength
GOOD FAIR
Distance from Cell Tower
-75dBm -90dBm
-100dBm -108dBm
POWER INCREASE
2 times the power and signal amplification
4 times the power and signal amplification
10 times the power and signal amplification
16 times the power and signal amplification
100 times the power and signal amplification
CELL PHONE SIGNAL BOOSTER
Signal Strength Signal Strength
POOR DEAD ZONE
-105dBm -110dBm
-115dBm -120dBm
HOME ROOM