Streetz CMB-100 Manual página 8

Forward button = short press (Bluetooth/USB), volume
up.
Backward button = short press (Bluetooth/USB),
volume down.
LED button = long press (Bluetooth), disconnect
Bluetooth. Short press to change LED mode and to turn
the LEDs off.
Mode button = short press to switch mode.
Mode button = long press to enable or disable TWS
function.
Voice assistant button = Long press.
Hands-free call
While using Bluetooth and someone is calling. Short on
press play/pause button to accept the call or long press
to reject the call.
During a call press and hold the play/pause button to
switch to talking on the phone. Short press on the play/
pause button ends the call.
"TWS"
Requirement: 2 identical speakers.
This speaker supports TWS functionality. It means
you can play the same music in stereo from 2 identical
speakers.
First make sure you are not connected to the speaker
with Bluetooth. Disconnect and forget the speaker from
your phone/Bluetooth device.
To enable the function: Turn on both speakers. Press
and hold the mode button on one of the speakers. The
speaker will make tone to confirm it is trying to pair. And
a 2nd tone when the pairing is successful.
Connect to the speakers from your Bluetooth settings on
your phone/Bluetooth device.
To disconnect: Press and hold the mode button on one
of the speakers.
General information
Play time may vary depending on volume level and
music.
Charge
Connect a USB-C cable to the charge port and the other
end of the cable to a USB power adapter (5V/1A to 3A)
or another USB power source such as a computer, to
start charging.
USB power adapter is not included.
Fully charged: The charge LED turns off. When battery
level is low, the speaker will make a tone.
This device does not support charging other devices.
Do not connect other devices such as phones to the
USB-C charge port.
Battery care: To protect the battery, do not use the
speaker while it is charging.
8
Warning instructions
Do not use or store this speaker in extreme
temperatures.
Keep it away from anything that generates heat such as
radiators and stoves.
Store in a cool and dry area.
To extend the speaker's lifespan avoid playing music on
maximum volume.
Cleaning and maintenance
Clean the product by using a dry cloth. For tougher
stains, use a damp cloth with a mild detergent.