Fizz Creations LASER TAG Instrucciones De Uso página 3

Instructions For Use
Thank you for choosing our product, we hope you enjoy it.
The enclosed instructions contain important safety
information. Please read carefully before use and retain for
future reference.
Setting Up
Remove both Laser Tags from the packaging.
Turn the power switches on both Laser Tags to the ON position.
Point Laser Tag 1 at Laser Tag 2 and press and hold the RESET
button. A bleep noise will occur and all three lights will light
up on Laser Tag 2. This now indicates that Laser Tag 2 is now
active and ready for use.
Repeat this step by pointing Laser Tag 2 at Laser Tag 1 to set up
Laser Tag 1.
How To Play
Once activated, both Laser Tags will be loaded with five shots
and six lives.
To score a hit against your opponent, aim your Laser Tag at the
centre of their Laser Tag and press the fire button.
A direct hit will result in your opponent losing one life,
indicated by a noise and one of their 3 lights flashing. When
the Laser Tag is hit again, there will be another noise and the
flashing light will go out. The next hit will result in the same
noise and the next light flashing. The process is repeated until
all the lights are out.
Once all lives have been lost, the Laser Tags will be disabled
and have to be reset again as the instructions in 'Setting Up'.
After firing your Laser Tag 5 times, it will need to be reloaded
before it can be used again. To reload your Laser Tag, simply
press the reload button.
Shooting range – up to 8 metres. The greater the distance, the
greater your accuracy must be.
Care Instructions
Switch oFF the Laser Tags when not in use.
WARNING!
Not suitable for children under 8 years.
Keep out of the reach of very young children.
WARNING: Dispose of used batteries immediately. Keep new and
used batteries away from children. If you think batteries might
have been swallowed or placed inside any part of the body, seek
immediate medical attention.
BATTERY INSTRUCTIONS:
Requires 3 X LR44, 1.5V batteries (Included)
HOW TO INSERT BATTERIES:
Unscrew the battery cover using a screwdriver. Insert fresh
batteries following the polarity marked on the product.
Replace the cover and secure with a screwdriver. Different
types of batteries (i.e.Alkaline and Zinc) or new and used
batteries not to be mixed. Only batteries of the same equivalent
type as recommended are to be used.
Batteries are to be inserted with the correct polarity.
Exhausted batteries are to be removed from the product. If
using rechargeable batteries, charge under adult supervision
and remove before charging. Non rechargeable batteries are
not to be recharged. The supply terminals are not to be short-
circuited. Do not throw batteries into a fire. Batteries should
never be left in the product when not in use for a long period
of time.
WEEE product should be disposed of by handing it over at a
designated collection point. For more information about where
you can drop off your waste product for recycling please
contact your local authority. For indoor use only. Read the
instructions carefully before use and retain this information
for future reference.