UHPPOTE HBK-D01 Manual Del Usuario página 3

4. Wiring Denition
Color
Red
Black
Green
White
Blue
Yellow
Gray
Note:
If the output format of the card reader you want is Wiegand 34bits, please
connect the Gray wire and the Black wire together.
5. Installation
Remove the back cover from the reader
Drill 2 holes on the wall for the self-tapping screws and 1 hole for the cable
Put the supplied
Fix the back cover firmly on the wall with 2 self-tapping screws
Thread the cable through the cable hole
Attach the reader to the back cover
Functionality
+12V
GND
D0
D1
LED
BEEP
Wiegand 34bits
plastic anchors
+12V power input
GND
Wiegand output D0
Wiegand output D1
LED signal feedback
Buzzer signal feedback
Optional
into the 2 holes
2
EN
Description