Zeegma Aromi Manual De Usuario página 7

32. To avoid the build-up of moisture and the multiplication of
bacteria, keep the device away from household items such as
carpets, tablecloths, curtains and furniture. If there is moisture
in the vicinity of the device, reduce the selected humidification
level.
33. Do not use chemicals to clean the device.
34. Do not use hard or metal objects to clean the device.
35. Do not move or relocate the device when there is water in
the tank or when the device is switched on. Do not carry the
device by holding the top part of the device.
DESCRIPTION OF THE PARTS (FIG. A)
1.
Lid
2.
Mist generation button
3.
Light button
4.
Weak mode
5.
Strong mode
6.
Air outlet
7.
Maximum water level line
8.
Water tank
USE
1.
Make sure the essential oil tube is tightly fitted (A, fig. 1).
2.
Fit the essential oil bottle onto the diffuser (fig. 2). Make sure
the bottle is tightened tightly to prevent the oil from leaking
out. The tube should be in the middle of the bottle.
3.
Make sure that the noise reduction cover (11, fig. A) is correctly
fitted.
4.
Connect the device to the power source (fig. 3).
5.
Pour water into the device without exceeding the maximum
water level line (fig. 4). Note! Do not let water get into the
air outlet.
6.
Place the cover on the device (fig. 5).
7.
Switch on the device by pressing the mist generation button
(fig. 6), then press again to set the desired operating time – 2,
4 or 6 hours. After the selected time has elapsed, the device
will automatically switch off.
If there is no water in the tank, the opening in the lid will light up
9.
Atomizer
10. Dropper
11. Noise reduction cover
12. Base
13. Air inlet
14. DC socket
15. Oil tube
EN