Publicidad
Idiomas disponibles
Idiomas disponibles
RMD 577BT
QUICKSTARTGUIDE
Basic operations
Home screen
On the home screen you can choose the available modes
(RADIO / USB / SD / streaming function / AUX) or enter the
SWC / EQ or SETTING menu.
Sound Control
• Volume
Turn the [VOL] button (9) to adjust the volume level.
• Audio settings
By pushing the [SEL] button (9) you will enter the audio menu
and you can adjust BASS / TREBLE / BALANCE / FADER
Etc. Push to choose and rotate to adjust.
Note: when an EQ preset is chosen the bass and treble
control are not available.
• Other Audio Settings
Settings like preset equalizer, loudness or subwoofer ON/OFF
can be set by tapping the "EQ" icon on the main menu.
Setup
Enter the setup menu by tapping the [SETTING] icon on the
main menu. Tap the items you would like to set. You can adjust
audio, date and time, language, calibration, etc.
Radio operations
Band
Tap the onscreen [BAND] button to choose FM1, FM2, FM3,
AM1 or AM2. On each band up to 6 presets can be stored.
Radio Seek Function
In Radio Mode, touch and hold the 7 or 8 button to adjust
seek the frequency automatically. Tap the button to adjust the
radio frequency manually step-by-step.
Save preset stations
There are six numbered preset buttons on the screen (P1-P6),
which can store and recall stations for each band. Tune in to the
station you want to store, touch and hold any key from P1-P6
until you hear a beep. The station will be saved in the
designated number.
After saving the stations, you can listen to short intros of each
preset by touching the [SCAN] button.
RDS
AF, TA, PTY are the RDS functions. Tap the onscreen buttons to
turn these functions ON/OFF.
Note: RDS might not be available in every country.
Streaming function operations
Pairing
Activate streaming function on your mobile phone, and search
for available devices. Select "RMD577BT_CAL".
If successful connected the logo stays ON, if not this logo keeps
flashing.
Dial pad
Touch the dial pad to dial the number you would like to call.
Touch the [CALL] (green) button to send the number.
Call list
Displays your phonebook and call history, if you've given
permission.
A2DP
Press the [MUSIC] button to enter the A2DP page to control
playing music of your cell phone using the onscreen controls
(available if you device supports A2DP).
Incoming calls
• Answer call:
push the green horn at an incoming call
• End call:
push the red horn
• Reject call:
push the red horn at an incoming call
USB/SD operations
Plug the USB/SD card into the USB/SD port. The unit will start
playing the contents automatically.
Audio playback
To control the audio playback, use the onscreen buttons.
Image playback
Push the [SEL] button (9) to show the playback options
Folder/file list
To show the contents of the USB/SD, tap the 0 onscreen button
to go back till the file directory is shown. The files are divided
into audio, movies and pictures.
RMD
PRECAUTIONS
Remote control:
1
12
13
2
3
14
15
4
16
5
17
6
7
18
19
20
8
9
21
10
22
23
11
1. q / MUTE:
Standby (long press)
Mute audio outputs
2. MODE:
Choose between
AV-in/AUX/streaming function/
Radio/USB/SD
3. MENU
Settings
4. A:
Move cursor left
5. BAND / TYPE: Choose between FM1, FM2, FM3,
AM1 and AM2 / Select type
6. 7:
Auto search / Previous track
7. No. 0~6:
Numeric buttons
8. SUB-T:
Subtitle on/off and language choice
9. AUDIO:
Change the audio output method
10. OSD
Statistical Disc Information Display Button
in/de-creases brightness
11. CLK:
Shows clock on small display
12. 12:
Play / Pause
13. W:
Move cursor up
14. D:
Move cursor right
15. ENTER:
Select or enter
16. 8:
Auto search / Next track
17. S:
Move cursor down
18. INT
Play intro's
19. RPT:
Repeat
20. VOL +:
Volume increase
21. APS:
Automatic preset scan
22. VOL - :
Volume decrease
23. SEL:
Sound select key
WARNING
Points to observe for safe usage
• Read this manual carefully before using this disc and the system components. They contain in-
structions on how to use this product in a safe and effective manner. Caliber cannot be responsible
for problems resulting from failure to observe the instructions in this manual.
!
WARNING
This symbol means important instructions.
Failure to heed them can result in injury or
material property damage.
!
Do not operate any function that takes your attention away from safely driving your vehicle.
Any function that requires your prolonged attention should only be performed after coming to a
complete stop. Always stop the vehicle in a safe location before performing these functions. Failure
to do so may result in an accident.
!
Keep the volume at a level where you can still hear outside noises while driving.
Excessive volume levels that obscure sounds such as emergency vehicle sirens or road warning
signals (train crossings, etc.) can be dangerous and may result in an accident. LISTENING AT
LOUD VOLUME LEVELS IN A CAR MAY ALSO CAUSE HEARING DAMAGE.
!
Do not disassemble or alter.
Doing so may result in an accident, fire or electric shock.
!
Use only in cars with a 12V volt negative ground.
(Check with your dealer if you are not sure.) Failure to do so may result in fire, etc.
!
Keep small objects such as screws out of the reach of children.
Swallowing them may result in serious injury. If swallowed, consult a physician immediately.
!
Use the correct ampere rating when replacing fuses.
Failure to do so may result in fire or electric shock.
!
Do not block vents or radiator panels.
Doing so may cause heat to build up inside and may result in fire.
Use this product for mobile 12V applications.
!
Use for other than its designed application may result in fire, electric shock or other injury.
Halt use immediately if a problem appears.
!
Failure to do so may cause personal injury or damage to the product. Return it to your authorized
Caliber dealer or the nearest Caliber Service Centre for repairing.
Product cleaning.
Use a soft dry cloth for periodic cleaning of the product. For more severe stains, please dampen the
cloth with water only. Anything else has the chance of dissolving the paint or damaging the plastic.
Temperature.
Be sure the temperature inside the vehicle is between +45°C (+113°F) and 0°C (+32°F) before turn-
ing your unit on.
Maintenance.
If you have problems, do not attempt to repair the unit yourself. Return it to your Caliber dealer or
the nearest Caliber Service Station for servicing.
Publicidad
