Spector&Co SPECFIT HW117 Manual De Instrucciones página 2

HW117 Product Map
HW117 Operation
1. ON: Press the
2. OFF: Press the
NOTE: the default massaging speed is set at medium-level. The massaging speed level cannot be
adjusted on the HW117
To charge the HW117
1. Twist battery cover (see #2 from Product Map) towards the
2. Insert the micro USB of the charging cable into input port of HW117 (see #6 from Product Map) &
connect USB output to a wall adapter (not included).
3. A solid red LED (see #7 from Product Map) will be lit to indicate that the HW117 is being charged
(the LED will automatically power OFF once the HW117 is 100% fully charged)
4. To stop charging, disconnect the charging cable & twist battery cover securely towards the
icon.
NOTE: This product is not water-resistant while it is being charged. To avoid water leaking into this
product, make sure the silicone ring (see #4 from Product Map) is free of solid particles before sealing
the battery cover after charging
power button (see #1 from Product Map) once
power button once
No Description
1 ON/OFF Power Button
2 Battery cover
3 Battery case
4 Water-resistant silicone ring
5 Massager prongs
6 Micro-USB input port
7 LED light
8 Open/Close mark
icon