AMS MU 322 Manual Del Usuario página 7

INSTALLATION
SETTINGS
Manual channel and frequency selection
Press SET twice, the FREQUENCY number will blink, press the UP or DOWN buttons to change the channel
that will affect the frequency showed on the display.
Manual volume selection
Press the UP or DOWN buttons to change the volume.
Manual channel and frequency selection
1. Turn on the power for receiver and handheld/bodypack transmitter, then press SET twice on the
receiver, frequency will blink.
2. Select your frequency on receiver with UP/DOWN buttons, and press SET.
3. Press SET on receiver once and display "IR", put handheld/bodypack transmitter IR port, face to
face, keep distance 30cm.
4. When receiver´s frecuency same as the frequency of transmitter then frequency sync operation
finished.
5. Remark: if frecuency sync fail, please repeat above steps.
6