Gladiator GCB800 Manual Del Usuario página 5

2. Manual Operation
Manual Operation of the circuit breaker is controlled by the circuit breaker handle and the PUSH TO TRIP button. The circuit breaker has three positions, two of which are
shown on the cover with raised lettering to indicate ON and OFF. The third position indicates a TRIP position and is between the ON and OFF positions. (See Fig. 6)
Circuit Breaker Reset
After an automatic or accessory initiated trip, or a manual PUSH TO TRIP operation, the circuit breaker is reset by moving the circuit breaker handle to the reset position.
PUSH TO TRIP button
The PUSH TO TRIP button checks the tripping function and is used to manually exercise the operating mechanism.
NOTE) Press PUSH TO TRIP button once a year to exercise circuit breaker.
● Handle Position Indicator Color
- RED – ON
- GREEN – OFF (RESET)
OFF position
Installation Instructions
ON
RESET
ON
<Fig. 6> Circuit Breaker Manual Controls
ON position
ON position
- 3 -
GCB800/1200
Auxiliary handle
RESET
OFF
(Push to trip)