Publicidad
Idiomas disponibles
Idiomas disponibles
CHARACTERISTICS
▶Power: 600/1,200W
ES
▶2 levels
▶Fixed position
PT
▶Security grid
ASSEMBLY INSTRUCTIONS
▶Keep a safe distance between the appliance and the wall and the
EN
appliance and any objects. They must be placed at least 40 cm.
▶Whenever it is installed in a bathroom, it will be necessary to
maintain a safety zone around it.
FR
▶Do not install the appliance directing the heat rays directly towards
the wall or adjacent objects.
▶Before undertaking any maintenance or handling operation,
disconnect the appliance from the socket. This appliance does not
require any specific or special maintenance.
▶To fix the unit on the wall, follow these steps:
• Unscrew the screw A that determines the inclination of the
appliance by one turn.
• Rotate the wall bracket to its maximum position.
• Remove the screw holding the wall mount cover and remove it.
• Use the holes in the bracket to drill into the wall.
• Drill two 6mm holes and insert the dowels.
▶During cleaning, avoid touching the quartz heating elements.
▶For cleaning it is recommended to use a soft cloth moistened with a
little neutral detergent. Do not use abrasive products or other means
that may alter the external appearance of the appliance. Check that
the parts exposed to heat rays are free of dust and dirt.
▶If the user does not read these instructions, both the safety of the
appliance and its warranty will be void..
Instruction manual
FUNCTIONING
▶Before connecting the device to the network, make sure that the
▶Plug the power cord into the AC 220-240V~ 50Hz outlet.
▶Through the 2 power system you can start the appliance.
▶If you do not use the appliance for a long time, unplug the power
▶Never try to disassemble the device.
▶If you notice any abnormality (such as unusual noise from the
▶Do not use this heater with a programmer, timer or other device that
▶Make sure that no objects or liquids get inside the appliance through
▶The device must only be used in dry environments. Do not use in the
▶Protect the device from dust, moisture, sunlight, and direct heat.
CLEANING AND MAINTENANCE
▶Make sure the appliance is unplugged before cleaning it.
▶Clean with a soft damp cloth, without detergent, aggressive liquids
▶Do not immerse the fan in water or any other liquid.
▶If the appliance is not going to be used for a long period of time,
switch is in the "0" position.
• POSITION 0: OFF position, no button pressed.
• POSITION 1: first speed - 600W
• POSITION 2: second speed - 1,200W
cord from the electrical outlet.
device), turn off the device and unplug it immediately.
switches the heater on automatically, as there is a risk of fire if the
heater is covered or incorrectly positioned
the openings.
immediate vicinity of a bathtub, shower or swimming pool
or solvents.
protect it and store it, or after cleaning it, in a dry place.
Ref. 07108
Publicidad
