Huawei CP60 Manual De Instrucciones página 5

Package Contains
HUAWEI Wireless Charger x 1
USB Type-C data cable x 1
10 V/4 A Charging adapter x 1
Quick start guide x 1
Warranty card x 1
Charging Your Wireless Phone
1. Connect the charging adapter to a power outlet and the data cable.
2. Connect the data cable to the wireless charger through the USB Type-C port.
3. Place the rechargeable area of the phone onto the center surface of the wireless
charger. Charging will begin on contact. (To locate the rechargeable area of the
phone, please refer to the phone's user manual)

The wireless charger comes equipped with multiple security protection
features. If you encounter an error during charging, check and fix any
issues that your phone may be experiencing, and then place your phone
back on the wireless charger.

For best charging performance, it is recommended that you use a
Huawei-approved charger.

If the phone is not correctly placed, it may not charge properly.

Do not place any object between the phone and the charger. A magnetic
support, protective case, metallic item, or an object containing an NFC or
RFID chip such as a room card, bus card, bank card, or passport between
the phone and the charger may cause the phone not to be properly
charged, induce additional heat, or damage the object. Before charging,
take out the object, if any, to ensure that it is not placed between the phone
and the charger.

To keep the wireless charger in good condition, avoid using it inside a
vehicle.

Do not fidget with the silicone rubber strips to prevent them from falling off
and thus lowering charging efficiency.
Indicator Descriptions
Color
The indicator is off.
The indicator blinks white
once.
The indicator stays
steady white.
The indicator blinks white
quickly.
The wireless charger is not connected to a power
supply or the phone has been removed from the
wireless charger.
The wireless charger is connected to a power supply.
The phone is being charged or is fully charged.
An error has occurred.
1
Description
English