Publicidad
Instalación
STEP 3 Installing the anti-slip pad
PASO 4 Ajuste de las patas niveladoras
18 Español
WW80K5210XW_DC68-03677U_ES(CS6).indd 18
1. Completely clean the bottoms of the
adjustable legs and wipe away any dust
and oil.
2. Mark the locations of the adjustable
front legs of the washing machine where
the anti-slip pads should be installed.
3. Attach the anti-slip pad by tilting or
moving the washing machine. When you
attach the pad, remove the plastic film
from the pad and attach the sticker side
of the pad to the floor so that the rough
side is facing upward. You should not
attach the sticker side of the pad to an
adjustable leg.
4. After installing the washing machine and
anti-slip pad, check if the adjustable legs
are level again.
1. Deslice suavemente la lavadora hasta
dejarla en su lugar. Si utiliza una
fuerza excesiva, puede dañar las patas
niveladoras.
2. Nivele la lavadora ajustando
manualmente las patas niveladoras.
3. Cuando haya completado el nivelado,
apriete las tuercas utilizando la llave.
2016/12/19 15:53:06
Publicidad
