Velleman CAMCOLVC14 Manual Del Usuario página 5

4. Features
•
extremely portable weatherproof camera with different mounting brackets
•
the video capture camera records images on micro SD card (not included)
•
only one operation push button
•
webcam function
•
AV output to show the recorded images directly on a TV
•
comes with: USB cable, AV cable, bike bracket and strap bracket
5. Overview
Refer to the illustrations on page 2 of this manual.
1 camera
2 camera lens
3 rear cap
4 camera holder
5 locking nut
6 release knobs
7 strap bracket
8 bike bracket
9 charge LED
6. Use
Refer to the illustrations on page 3 of this manual.
Strap mounting bracket [7]
•
Hold the strap bracket [7] as indicated and insert the rubber or Velcro strap.
•
Place the strap over your helmet (rubber strap) or your arm, wrist ... (Velcro
strap).
Bicycle mounting bracket [8]
•
Place the bike bracket [8] over the handlebar grip and secure it tightly with the
bolt and nut.
Camera
•
Slide the camera into the holding bracket [4] and slide the holding bracket [4]
in the strap [7] or bike [8] bracket until the release knobs [6] snap into place.
•
Release the locking nut [5] and point the camera towards the field of interest.
Make sure the top indicator [18] is on top.
•
Tighten the locking nut [5].
•
To release the holder [4] from the strap [7] or bike [8] bracket, press the
release knobs [6] towards each other and pull.
Operation
•
Unscrew the rear cap [3] and insert an SD card (not incl.) in the SD card slot
[15] (connections facing USB port [16]).
•
Set the battery on/off switch [17] to ON (left).
•
Set the VGA/QVGA selector [13] to VGA or QVGA:
VGA: resolution 640 x 480
QVGA: resolution 320 x 240
20.09.2010
CAMCOLVC14
10 power LED
11 power button
12 microphone
13 VGA/QVGA selector
14 AV output
15 SD card slot
16 USB port
17 battery On/Off switch
18 top indicator
5
©Velleman nv