Jackson WH70 BH3 Instrucciones De Uso página 8

2
1
In case an automatic filter needs to be removed from the bearing (e.g. due to the changing of the
inner protection foil), first release the loop on the connecting electrical cable, as shown in Figure
10, and remove the filter. When inserting the filter back into the bearing, place the cable and the
loop as shown in Figure 11 (WH70 BH3
considerable overload and consequential cable tear while displacing the filter.
6
4.
7.
). The extended electrical cable is required to prevent
®
10.
5.
8.
11.
6.
9.