Sicam JUMBO TCS52 NW Manual Original página 21

1. Symbols used
1.1 In the documentation
1.1.1 �arning notices - Structure and meaning
Warning notices indicate hazards and their consequen-
ces for the user or surrounding persons. Warning notices
also describe the measures for preventing these hazards.
The signal word has a crucial importance. It indicates
the probability of occurrence and the severity of the
hazard in case of non-compliance:
Signal Probability of
word occurrence
D��GER
Immediate impending
danger
��R�I�G Possible impending
danger
���TI��
Possible dangerous
situation
Below you will see an example of the "Live parts"
warning notice by way of example, with the signal word
D��GER:
D��GER – Exposure of live parts on open-
ing the ��M�� T�S�� ��!
Risk of (fatal) injury or heart failure from elec-
tric shocks on contact with live components
(e.g. master switch, printed circuit boards).
¶
Work on electrical installations or equip-
ment is only to be performed by qualified
electricians or trained personnel under the
guidance and supervision of an electrician.
¶
Disconnect JUMBO TCS52 NW from the
mains before opening.
1.1.� Symbols in this documentation
Sym- Designation Explanation
bol
Attention Warns about possible property damage.
!
Information Practical hints and other
i
useful information.
1. Multi-step op- Instruction consisting of several steps
2. eration
One-step oper- Instruction consisting of one step.
e
ation
Intermediate An instruction produces a visible inter-

result mediate result.
Final result There is a visible final result on comple-
"
tion of the instruction.
Sicam srl società unipersonale
1.�
!
1.�
!
Severity of danger
if instructions not
observed
Death or severe
injury
Death or severe
injury
Minor
injury
Symbols used | ��M�� T�S�� �� | �1 ��M�� T�S�� �� | �1
�n the product
Observe all warning notices on products and ensure
they remain legible!
�dditional adhesive tags
Respect all the safety instructions and danger war-
nings on the products and keep the related tags in
full readable conditions!
Mains tension
Danger of electrical shock when touching the
parts of the electrical system.
�heel unlocking
Danger of crushing in the area close to the
wheel locking assembly.
�orking arm fitting
Danger of crushing in the area close to the
working arm.
| �1 en
|
1 695 301 901 2011-07-14