Aurora AU-A1ZBPIAB Guia De Inicio Rapido

MODEL AU-A1ZBPIAB
DESCRIPTION PLUG IN ADAPTOR
VOLTAGE (V) 230 V AC
POWER CONSUMPTION 0.5 W
HERTZ (HZ) 50 Hz
RESISTIVE LOAD 3000W
INDUCTIVE LOAD 3000VA
RF FREQUENCY
2.4GHz, IEEE 802. 15.4
WORKING ENVIRONMENT TEMP
0°C to 40°C
WORKING ENVIRONMENT HUMIDITY ≤85% Non Condensing
POWER METERING ACCURACY Typ +/- 3.0%
WIRELESS PROTOCOL ZigBee 3.0
DISTANCE 30m (open field)
IP RATING Indoor use only
PRODUCT RATING 0.08-13A
• There are no restrictions of use.
• Hereby, Aurora Limited declares that the radio equipment type
AU-A1ZBPIAB is in compliance with Directive 2014/53/EU. The full
text of the EU declaration of conformity is available at the following
internet address:
www.auroralighting.com/ProductDetail/AU-A1ZBPIAB
USING THE APP TO CONTROL THE PLUG IN
ADAPTOR WITH YOUR PHONE
1. Download AONE UK App from your App store.
2. Follow instructions on the App to send the hub into pairing mode
and pair your devices (further details below).
3. Put the Plug in Adaptor into pairing mode by connecting the
Plug in Adaptor into a power outlet, or pressing the pairing
button for 6 seconds, the LED will flash blue.
4. The Plug in Adaptor will now start searching for a network to
join.
5. When the LED stops flashing the Plug in Adaptor has
successfully joined the network.
6. Use the App or push the LED button to activate the output, the
LED will now turn blue for on, and red for off.
1
4
LED flashing Blue
www.auroralighting.com
2
5
3
6
Flash White
Document Version: AU-A1ZBPIAB_V2_19
Power/Pairing button