Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
To set the two temperature values:
Press the
key until you access the "COMFORT"
corresponding symbol is shown at the top of the display;
Use the
and
thermometer icon indicates that the setting is in progress;
Prolonged pressure on the
values;
After
5"
of
inactivity
"CHRONO"
mode.
3. DEFINITION OF THE PROGRAMMES
The EMIDUAL must be in CRHONO mode
Programming is only possible with the MP-EMIDUAL model.
After having set the time, the day and the two reference temperatures, it is possible to
move on to the daily programming.
There are two possible programme settings:
P1
P2
The two programmes (P1 and P2), which remain memorised even if the two batteries go
flat, are independent of each other and can be used, for example, for different areas
(living area and sleeping area) or for different periods (such as autumn and winter). In any
case only one of the 2 programmes can be sent to the apparatus.
To carry out the programming, proceed as follows:
Press the
key until you access P1 or P2 mode, and the corresponding symbol appe-
ars at the top of the display;
Hold the
key down to enter the programme display mode. The
and with the
and
set programme. To exit the display mode without modifying the programme press :
symbol stops flashing.
If the programming of one or more days is not satisfactory, do not use the
hold the
key down until the indicator of the day of the week starts to flash;
Starting from Monday and the "off" condition for all 24 hours of the day, it is possible to
keys to define the desired temperature. The flashing
and
keys makes it possible to rapidly go through the
the
display
keys it is possible to display the various days so as to check the
or "ECO"
automatically
returns
for programming.
10
modes and the
to
showing
the
symbol flashes
the
key, rather
Publicidad
Tabla de contenido
