Lavor BSW 651 M Manual De Uso Y Manutención página 29

BSW 651 &
EXTRAORDINARY MAINTENANCE
REPLACEMENT OF BRUSHES
Central Brush:
- Remove completely the front basin for wastes;
- Unscrew the two clamping screws
- Extract the central brush
- Assembly
-
- y the new brush following the above-mentioned stages backwards.
Lateral Brush:
- Lift the brush support arm to * vertical position.
- Unscrew fastening screws
- Reassem)ly the new brush following the above-mentioned stages backwards.
N.B.: After installing new brushes, check their height.
adjust them.
1
(1);
(2)
as shown in Figure;
(1)
and remove the worn brush.
29
lf
necessary,