Descargar Imprimir esta página

Orbegozo SE 1200 Manual De Instrucciones página 10

Secadores de viaje

Publicidad

Idiomas disponibles

Idiomas disponibles

SE 1200
• Always switch the appliance off before putting it
down, even if it is only for a moment.
• Always unplug the appliance after using it.
• Let the appliances get cold before store it.
• Do not introduce any metallic item in the air let in
order to avoid an electric discharge.
• Do not put the air outcome too close the hair.
DRYING
1. Put the plug in the wall socket. Check if the voltage indicated on the appliance
corresponds to the local voltage before you connect the appliance.
2. Switch the appliance on by selecting the desired setting.
The airflow and temperature can be adjusted:
Speed setting
2: High speed
1: Low speed
0: Off
Styling attachments
Concentrator
The concentrator enables you to direct the airflow at your hair that you are styling.
Connect the concentrator by simply snapping it onto the appliance. Disconnect it by pulling it off.
CLEANING
1. Turn this appliance off before cleaning.
2. Remove the grill in order to eliminate the dust and hair.
3. The appliance can be cleaned with a dry cloth.
4. The attachments can be cleaned with a moist cloth or rinsed under a running tap.
Remove the attachments from the appliance before cleaning them. Make sure the attachments are
dry before using or storing them.
Never rinse the appliance with water.
STORAGE
When not in use "unplug it."
Allow the appliance to cool and store it in a dry location. This hair dryer features a loop allowing it to
be conveniently hung on a hook for easy access. Never wrap the cord around the appliance since
All manuals and user guides at all-guides.com
Heat setting
High heat
Medium heat
10

Publicidad

loading