Descargar Imprimir esta página

Crosley CR6034B Manual De Instrucciones página 5

Publicidad

Idiomas disponibles

Idiomas disponibles

English
Initial Setup
Essential Setup
1. Place the unit on a flat and level surface. The selected location should be
stable and free from vibration.
2. Remove the tie-wrap that is holding the tonearm.
3. Place the slip mat on top of the turntable platter.
4. Connect the speakers to the Speaker Output Terminals of the turntable.
5. Connect AC adaptor to the Power Jack of the unit.
Note: Do not plug the AC power adaptor to power outlet before all the assembly is
completed. Before turning the power on, make sure again all the connection settings
are correct. Always turn off the power when connecting or disconnecting.
Stereo System Connection
Spring clip speaker terminals
Connect one end of the speaker wire included with this package to the back of
the speakers and the other end to the Speaker Output Terminals. To do this, flip
the spring clips to the open position, insert the speaker wire, and flip the spring
clips to the closed position.
Aux Input Connection
You can connect an audio device to this unit and play your music through its
speakers. To do this, rotate the Function Knob to Aux In mode, connect the
3.5mm auxiliary cable between your audio device and the Aux In Jack of this
unit and start playing.
5

Publicidad

loading

Este manual también es adecuado para:

Switch ii