Symbols - Ryobi WS720S Manual Del Operador

The following signal words and meanings are intended to explain the levels of risk associated with this product.
SyMbOL SIgNAL
DANgER:
WARNINg:
CAUTION:
CAUTION:
Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpreta-
tion of these symbols will allow you to operate the tool better and safer.
SyMbOL
Safety Alert
V Volts
A Amperes
Hz Hertz
W Watt
min Minutes
Alternating Current
Direct Current
n o
No Load Speed
Class II Construction
.../min Per Minute
Wet Conditions Alert
Read The Operator's Manual
Eye, Ear, & Breathing
Protection
No Hands Symbol
Electrocution

SyMbOLS

MEANINg
Indicates an imminently hazardous situation, which, if not avoided, will result
in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, could result
in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, may result in
minor or moderate injury.
(Without Safety Alert Symbol) Indicates a situation that may result in property
damage.
NAME
Indicates a potential personal injury hazard.
Voltage
Current
Frequency (cycles per second)
Power
Time
Type of current
Type or a characteristic of current
Rotational speed, at no load
Double-insulated construction
Revolutions, strokes, surface speed, orbits etc., per minute
Do not expose to rain or use in damp locations.
To reduce the risk of injury, user must read and understand
operator's manual before using this product.
Wear eye, hearing, and breathing protection when operating this
equipment.
Failure to keep your hands away from the wheel will result in
serious personal injury.
Failure to properly ground can result in electrocution.
5 — English
DESIgNATION/ExPLANATION