Publicidad
Idiomas disponibles
Idiomas disponibles
CP 116116
3. Loosen the motor joint bolts and attach the bar with cover to the motor using the flanged pin
and bolts
ATTENTION: It is very important to ensure that the flanged pin is correctly installed and
secured. Poor fixing of the pin can result in the fall of the fan.
4. Remove the screws already pre-installed in the blade bracket and screw the blades to the
motor head.
5. Remove the pre-installed screws on the lamp holder and screw in the lamp using these. Once
the lamp is in place, plug in the LED plate as shown in the image.
15
Publicidad
