TONOR K6 Manual página 11

Connect with Bluetooth
1. Press the MODE button on the Top Control panel or on the
remote control to switch to the BLUETOOTH CONNECT mode,
(BLUE)will be displayed on the screen.
2. Open the Bluetooth on the external device (must have Bluetooth
function), and the name "TONOR K6" will show on the device. Please
try to connect it.
3. Once connected, you can hear a small sound from the speaker.
4. You can use the
control the tracks of the extermal device.
Note: This speaker do not need the password.
Connect with AUX Line in
1. Press the MODE button on the Top Control panel or on the
remotecontrol to switch to the AUX mode, AUX will be displayed on
the screen.
2. Connect this speaker to AUX inserting jack and the external
device Earphone jack by provided AUX cable.
3. Once connected, turn on your external device music.
4. You can use
the tracks of the external device.
Caution: Please turn off the unit before connect AUX cable in order
to avoiding unexpected noise.
Connect with Wired Microphone/Guitar
Insert 6.35mm wired microphone to play with microphone.
Insert 6.35mm wired guitar to play with guitar.
When playing with the wired microphone/guitar, please press this
knob to adjust the sound volume level of microphone/guitar.
1. Press this MIC/GT, you can open the volume control of
microphone/guitar, the display will have corresponding function on
the screen, then turn the volume knob to adjust the sound volume
or key on the Top Control panel to
or button on the Top control panel to control
10