Publicidad
Idiomas disponibles
Idiomas disponibles
1 Short press button "x"
2 Long press button "x"
3 Press and hold button "x"
5.2.
SWITCHING ON AND OFF
i
Auto-off after 10 minutes of inactivity as standard. Can be configured or deactivated using the HCT app.
1. To switch on, briefly press the "ON" button.
2. To switch off, press the "ON" button for four seconds.
▶ "OFF" display is briefly shown and then measuring device switches off.
5.3.
SLEEP MODE
i
This is activated automatically after 1 minute of inactivity as standard. Can be configured or deactivated using the HCT app.
1. To switch to sleep mode, long press the "ON" button.
▶ The "SLEEP" display is briefly shown and then the measuring device switches to sleep mode.
2. To end sleep mode, press any button or move the measurement sensor.
5.4.
SET THE DISPLAY VALUE TO "0"
1. To set the display value to "0", briefly press the "ON" button.
5.5.
SET THE DISPLAY VALUE TO THE PRESET VALUE
1. To set the display value to the saved preset value, briefly press the "PRESET" button.
▶ If no preset value is saved, the display value is set to "0".
5.6.
RESET TO FACTORY SETTINGS
1. To reset the measuring device to factory settings, simultaneously press and hold the "PRESET" button and the "ON" but-
ton for at least three seconds.
▶ "rESEt" is briefly displayed.
▶ All settings are deleted.
▶ Display value is set to "0".
5.7.
QUERYING THE STATUS OF THE BLUETOOTH CONNECTION
1. Briefly press the "DATA" button.
▶ If the Bluetooth module is deactivated, "no bt" is briefly displayed.
▶ If HID mode is active, but no device is connected via Bluetooth, "noHid" is briefly displayed.
▶ If APP mode is active, but no device is connected via Bluetooth, "noAPP" is briefly displayed.
▶ If HID mode or APP mode is active, and a device is connected via Bluetooth, "OK" briefly flashes in the measured
value display.
4 Release button "x"
5 Inversely displayed digit flashes
www.hoffmann-group.com
de
en
bg
cs
da
es
fi
fr
hu
hr
it
lt
nl
no
pl
pt
ro
ru
sk
sl
sv
17
Publicidad
