Alemite 596 Serie Instrucciones De Uso Y Mantenimiento página 9

WARNING

Do not use any hose not approved by
Alemite. Extreme pressure may cause
nozzle extension or whip hose to burst.
Replace hose at first sign of wear,
kinks, or damage to outside jacket.
Follow whip hose instructions
and warnings.
Failure to comply may result in death
or serious injury.
WARNING

Grease gun can develop high pressure
up to   psi (689 bar) stall pressure
and   psi (413 bar) operating
pressure.* Use safety glasses and gloves
for protection during operation. Keep
hands clear of exposed rubber portion
of hose.
Failure to comply may result in death
or serious injury.
* Indicates change.
Residual risks
Additional residual risks may arise when
using tool that may not be included in
enclosed safety warnings. These risks can
arise from misuse, prolonged use, etc.
Even with application of relevant safety
regulations and implementation of safety
devices, certain residual risks cannot be
avoided. These include:
• Injuries caused by touching any rotating/
moving parts.
• Injuries caused when changing any parts,
blades or accessories.
• Injuries caused by prolonged use of tool.
When using any tool for prolonged periods
ensure regular breaks are taken.
• Impairment of hearing.
• Health hazards caused by breathing dust
developed when using your tool (example:
working with wood, especially oak, beech
and MDF).
NOTE
Vibration emission value during actual
use of power tool can differ from
declared value depending on how tool is
used. Vibration level may increase above
level stated.
Vibration
Declared vibration emission values stated in
technical data and declaration of conformity.
have been measured in accordance with a
standard test method provided by EN 
and may be used for comparing one tool
with another.
Declared vibration emission value may
also be used in a preliminary assessment
of exposure.
When assessing vibration exposure to
determine safety measures required by
//EC to protect persons regularly
using power tools in employment,
estimation of vibration exposure should
consider actual conditions of use and the
way the tool is used, including taking account
of all parts of operating cycle such as times
when tool is switched off and when it is
running idle in addition to trigger time.

Labels on
battery charger*
The following symbols are shown on tool:
WARNING

Do not use tool before reading manual
to reduce risk of injury.
Failure to comply may result in death
or serious injury.
Time-lag miniature
T 3.15A
fuze link, 3.15A
IEC
IEEE/ANSI
IEEE/ANSI