Ryobi ACRM013 Manual Del Usuario página 3

FRAME
 Install the upper end of the top bagger tube (side with
bag full indicator) into the hole in the back of the grass
catcher cover.
 Install bottom bagger tube to side discharge outlet by
placing opening over tab on mower deck frame, then
hooking the fasteners to the frame as shown.
COVER
FRAME
RAIL
CLIP
Fig. 6
COVER
LOWER
TUBE
BAGS
LATCH
Fig. 7
ELASTIC
CORD
LATCH
Fig. 8
 Pull the top tube back out of the cover just far enough to
connect the two tubes together, lining up hole in bottom
tube latch with tab on upper tube. Push bottom tube latch
over top tube tab to secure.
 Make sure inlet sleeve is pulled out and upper tube is
completely inserted inside the bagger top.
3 — English
SLEEVE
HOLE
UPPER
TUBE
UPPER
TUBE
TAB
Fig. 9
SLOT
TAB
LATCH
Fig. 10
LOWER
TUBE
Fig. 11