Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY INSTRUCTIONS
1. Wipe off the area on the top of the countertop (A) where the
backsplash (B) will sit using a clean cloth. Apply a line of silicone onto
the unfinished bottom side of the backsplash (B). Align the backsplash
(B) with the back edge. Slowly lower it onto the countertop (A) and
gently press to adhere. (Allow it dry for 24 hours)
2. Wipe away any seeping silicone from underneath the backsplash
(B) with a trowel and clean cloth. Place the metal ring and tube as
illustrated.
3. Installation Complete - Allow the vanity to dry for 24 hours before
use.
For further information regarding adjustments and maintenance
please see below.
1
B
A
Apply silicone onto the unfinished bottom side and rotate it to install.
2
B
3
24H!
PAGE 6
Publicidad
