HOTO QWLSD001 Manual Del Usuario página 8

05 Troubleshooting
Fault
Indicator blinking red when the on/off switch is pressed
1
The product doesn't work a er pressing the on/off switch
2
Bit cannot be installed
3
Ba ery won't charge
4
Cause
Low ba ery power
1
No ba ery power
2
Bit size doesn't match the size of the bit holder
3
The USB cable isn't plugged in or specified charging cable
4
isn't being used
Solution
Charge the ba ery
1
Charge the ba ery
2
Use an appropriate bit
3
Use the specified charging cable; 5 V power adapter needs
4
to be used. Check whether the charging indicator is on.
06 Specifications
Model: QWLSD001
Maximum Torque in Electric Mode: 4 N · m
Maximum Torque in Manual Mode: 8 N · m
Item Dimensions: 178.8 × 34 × 35 mm
Main Unit Net Weight: Approx. 250 g
Rated Voltage: 3.6 V
Operating Temperature: -10°C to 40°C
Storage Temperature: -20°C to 60°C
Bit Size: C6.3 × 50 mm
Flat Head: SL4
Cross Head: PH1/PH2/PH3
Hex: H3/H4/H5/H6
Torx: T15/T20/T25
Pozidriv: PZ2
Rotation per Minute (Unloaded): 220 rpm
Charging Time: < 150 min
Manufacturer： Shanghai HOTO Technology Co., Ltd.
Address： Building 45, No. 50 Moganshan Road, Putuo
District Shanghai, China
6 A (MAX)
7