ASSEMBLY INSTRUCTIONS
7. Secure both sets of hook and loop fasteners located
under the cloak to the hook and loop fasteners on the
front and back of the base.
OPERATING INSTRUCTIONS
8. Move the switch to the ON position. Move in front
of the item or make a loud sound (clap) to activate
the item. Turn the switch to the OFF position
when not in use.
OPTIONAL DEMO AND EXTERNAL SPEAKER SET UP
OPTIONAL DEMO SET UP
FOOTPAD/PUSH BUTTON IS NOT INCLUDED. MUST BE PURCHASED SEPARATELY.
1. Insert the cable from optional footpad/push button into the
jack labeled DEMO on the CONTROL BOX.
2. Place the switch in the DEMO position to enable
DEMO activation.
3. Step on the FOOTPAD or press push button to activate the
scary sequence!
*
Footpads and push buttons are sold separately and can be
purchased at www.tekkyaccessories.com
7
8
Page 5