hillvert HT-FAN-100 Manual De Instrucciones página 14

CAUTION!
The term "device" or "product" in the warnings and in the description of the manual
refers to
Fan
2.1. Electrical safety
a) Electrical wiring and installation work should be carried out by a qualified
person in accordance with the applicable regulations and standards!
b) The connected power supply of the device should have overcurrent protection
against damage caused by overload!
c) The plug of this device must fit into the outlet. Do not modify the plug in any
way. Original plugs and matching outlets reduce the risk of electric shock.
d) Do not touch the device with wet or damp hands.
e) Do not use the cord in an unintended manner. Never use it to carry the device
or to pull the plug out of the socket. Keep the cord away from heat sources,
oil, sharp edges or moving parts. Damaged or tangled cords increase the risk
of electric shock.
f) Do not use the unit if the power cord is damaged or shows signs of wear. A
damaged power cord should be replaced by a qualified electrician or the
manufacturer's service department.
g) CAUTION – DANGER TO LIFE! When cleaning or using the appliance, never
immerse it in water or other liquids.
h) Do not use the appliance in rooms with very high humidity / in the immediate
vicinity of water tanks!
i) Do not allow the machine to get wet. Risk of electric shock!
2.2. Safety in the workplace
a) Keep the work area tidy and well lit. Disorder or poor lighting can lead to
accidents. Be foresighted, watch what you are doing and use common sense
when using the unit.
b) Do not use the unit in an explosive area, for example in the presence of
flammable liquids, gases or dust. The unit produces sparks that can ignite dust
or fumes.
c) If you find any damage or irregularities in the operation of the product,
immediately turn it off and report it to an authorized person.
d) If you have any doubts as to whether the unit is working properly or if it is
damaged, contact the manufacturer's service department.
Read all safety warnings and instructions. Failure to follow the
warnings and instructions may result in electric shock, fire
and/or serious injury or death.