KiCA Jet Fan 2 Manual Del Usuario página 5

5. Intelligent protection
The product will auto power off, if there is no operation within 3 minutes in
standby mode.
6. Charging
USB-C 5V --- 1A
7. Specifications
Product name: KiCA Jet Fan 2
Model: KiCAAM02
Operating voltage range: 12.8V~16.8V
Operating temperature range: 0℃ ~+40℃
Storage temperature range: -20℃ ~+60℃
Battery capacity: 1100mAh
Charging time: About 3H 30min (5V/1A)
Weight: About 302g
Size: 71.9×37.4×128.9mm
Max. revolution speed: 101,000±10% r/min (Reference value)
Max. runtime: About 3H 30min (Test in lab environment under the low speed)
Packing list:
Main body×1, Large nozzle×1, Small nozzle×1, USB-C cable×1, Manual×1
Cautions:
Please read and save this quick start guide carefully.
To reduce the risk of fire, serious injury, and property damage, observe the following safety
guidelines when using:
1. DO NOT use it when your hands are wet.
2. DO NOT allow the product to come into contact with any kind of liquid. DO NOT leave the
product out in the rain or near a source of moisture. DO NOT drop the product into water.
3. Never block the air openings of the machine while using.
4. Never drop or insert any objects into any openings.
5. DO NOT leave it near heat sources such as a furnace or heater. DO NOT leave the product
inside of a vehicle on hot days.
6. DO NOT use it where flammable items are being used (like gas, spray and so on), or it might
cause fire or explosion.
7. Damage may be caused to it if dropped or subject to external force. Never operate the
product if it is not working properly, or if it has been dropped or damaged. Return it to a
service center for examination and repair.
3