INSTRUCTION MANUAL FOR CAUNY WATCH
CLG001, CLG002, CLG003, CLG004, CLG005, CLG006
Caliber Nº: MI-0S20
Battery: SR927W
Features: Center second hand chronograph 1/1 sec. Timing up to 59 minutes 59 seconds
A) DISPLAY AND BUTTON
B) SETTING THE TIME
Pull the crown out to the 2nd position.
1.
Turn the crown to set hour and minute hands.
2.
When the crown is pushed back to the normal position, small second hand begins to run.
3.
C) SETTING THE DATE
Pull the crown out to the 1st position.
1.
Turn the crown counter-clockwise to set the date.
2.
*If the date is set between the hours of around 9:00 PM and 1:00 AM, the date may not
change on the following day.
After the date has been set, push the crown back to the normal position.
3.
D) USING THE CHRONOGRAPH
This chronograph is able to measure and display time in 1/1 second united up to maxinum of 59
minutes 59 seconds.
The chronograph second hand keeps continuously for 59 minutes 59 seconds after starting.
Measuring time with the chronograph
The chronograph can be started and stopped each time button "A" is pressed.
1.
Pressing button "B" resets the chronograph and the chronograph second hand and
2.
chronograph minute hand return to zero position.