Publicidad
Idiomas disponibles
Idiomas disponibles
additional utilities
Utilities
In addition to INFO, The Utilities Menu contains the following:
GFCI (GFCI Test)
(Feature not available on CE rated systems.)
GFCI Test is not always enabled, so it may not appear. This screen allows the GFCI to be tested manually from the panel and
can be used to reset the automatic test feature. If the GFCI Test Feature is reset, the device will trip within 7 days. (See
Page 17)
A / B (A/B Sensor Temperatures)
When this is set to On, the temperature display will alternate to display temperature from Sensor A and Sensor B in the
heater.
FALT LOG (Fault Log)
The Fault Log is a record of the last 24 faults that can be reviewed by a service tech.
DEMO (Demo Mode)
Demo Mode is not always enabled, so it may not appear. This is designed to operate several devices in a sequence in order
to demonstrate the various features of a particular hot tub.
24
Publicidad
