Publicidad
Idiomas disponibles
Idiomas disponibles
Getting started
4.
Insert the Revolution Toastie Press into
the RIGHT SLOT ONLY, ensuring that the
handles are facing away from the center of
the toaster. The metal tabs on either side of
the Revolution name are designed to ensure
proper placement within the toaster slot.
DO NOT PUSH DOWN ON THE REVOLUTION
TOASTIE PRESS.
Due to the nature of this product, handles
will be very hot to the touch if placed above
open heating area during active toast cycle.
Be sure the handles hang over the side of the
toaster, not the center.
5.
When the START button flashes, give it a tap
and get ready for your deliciously toasted food!
6.
Once the cycle completes, carefully remove
the Revolution Toastie Press from the slot.
7.
Separate the handles to open the Revolution
Toastie Press. Allow the food to cool to a
safe temperature prior to touching. Remove
sandwich with the help of a wooden spatula.
Never use metal tongs or a knife as these can
cause damage to the non-stick coating. Do
not use rubber tongs as they may melt.
with your Revolution InstaGLO
CAUTION
Hot Surface—The temperature of
accessible surface may be high
when the appliance is operating.
Note: The Revolution InstaGLO
equipped with an auto lift. Hitting the start
button will automatically lower the Revolution
Toastie Press and your food into the toaster.
The toaster will automatically move the
Revolution Toastie Press to the raised position
when toasting is complete.
Note: Toasting can be canceled
at any time by pressing the CANCEL
button. This will cancel the
operation and the Revolution
Toastie Press will move
to the raised position.
Note: When using
the Revolution Toastie
Press, do not put
anything into
the other slot
of the toaster.
Toaster
®
Toaster is
®
7
Publicidad
